The complete set includes:

1. Two complete stainless steel curve strainers.
2. Three enlargers with nut and joint.
3. A swivel arm with nut and joint.
4. A discharge curve with o'ring joint and pull & expand screw that allows to hermetically secure the device to the waste pipe in the wall.Exclusive system developed and patented by ERREDE.
5. A waste trap body with three outlets.

Features:

The new ERREDE modular waste trap was designed to allow an easy installation either by the prefessional or the end user.
Due to its modular design and interchangeable accessories it allows a perfect setup and a minimal waste of space under the sink.

The included strainers allow to firmly fix the device to the sink with screws so eliminating any possiblity to accidentaly fall over.

Waste discharge is conducted entirely through straight pipes eliminting the turbulences originated by corrugated connections. This allows a much faster discharge.

If necessary, enlargers can be attached to the swivel arm in order to allow a perfectly alignment for the waste discharge.

The discharge curve - exclusive system developed and patented by ERREDE - is firmly secured to the waste pipe in the wall by adjusting the pull and expand screw making the o'ring joint to expand and sealing hermetically the connection.

The main body of the modular waste trap has being developed to need less than four inches of space under the sink when the traditional systems available need 8, 10 or even more allowing all this space to be used for storage as needed.

The enlarger that connects the strainer with the main body can be placed at either side of the body in order to allow an optimal placement.

Enlargers length can be adjusted if necessary cutting them to the appropriate size.